2017年6月27日星期二

Why your print head easy to be blocked?

The reason of print head nozzles blocked:
As some kind color do not inkjet for a long time or the temperature increase when nozzle is using, so that the stationary ink will be drying agglomeration in nozzle wall, and if do not clean in time and the drying of relatively powerful, the nozzle may not be cleaned open,therefore, should cleaning immediately when found the print head nozzles blocked.
Ink reach the nozzle, will go through a filter whose diameter is of 10—26μ, its fineness smaller than the diameter of nozzle, so when the ink reaches the nozzle, have process super filter, will not clog caused by nozzle.
1.Make ready a pot of water over 80℃;
2.Put one bottle eco-solvent cleaner into the water;
3.Preheat 5 minutes and take it out;
4.Remove the print head and use injector inject eco solvent cleaner some times,be careful that don't ask the cleaner spurt on the print head circuit;
5.Install the print head and printing test to check the result;
6.Print C M Y K LC LM color block to make sure that the cleaner print out with ink.

More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

Coating Layer for ultra-light weight sublimation transfer paper

The Currently on the market of tissue paper can be divided into two categories: one is uncoated tissue paper, this kind of tissue paper is actually produced in the paper machine with high consistency of the base paper, print clarity and transfer rate are very low , With the use of expensive high concentrations of ink to ensure the color density of textiles; the other is a coated tissue paper, this kind of tissue through the entire international market, only a manufacturer of the quality is still available (but Expensive), the domestic manufacturers of thin paper in the paper formation and drying speed does not have the advantage, still in the production of thick paper formulations and technology in the manufacture of tissue paper.

For thin Sublimation paper we have developed a third generation of coating formulations, compared to the second generation of formula, the characteristics of the third generation of recipe has the following advantages:
1. paper is flat, not easy to bend: thin paper itself because the paper is thin, stiffness is far less than thick paper, if the same paper with the same technology and formula, it is almost impossible to produce very flat transfer paper, and three generations from Material selection is completely different from the second generation formula, three generations of formula material is not easy to warp, which fundamentally solve the paper between the thin and war between the contradictions, 45~65 grams sublimation paper even on the hot press Under the high temperature baking is flat, which is very beneficial for the transfer of pieces. It can be said that the sublimation paper adapt to any humidity environment, flat printing and transfer.
2. Drying speed: three generations of the characteristics of the formula is dry fast, if not very heavy ink volume printing, the whole Si Fu thin paper can be printed while the edge of the film, do not need to open the drying equipment. F 100 grams of product drying speed of about 4 minutes and 30 seconds.
3. Transfer rate can be comparable to 100 grams of products: the general use of second-generation formula made of thin paper in order to reduce the curl and enhance the drying rate is often reduced to achieve the amount of coating, and reduce the amount of coating means that the coating ink capacity reduction, So that the transfer rate can not be guaranteed, or the transfer rate, the paper drying speed and the warpage resistance are deteriorated. Warping, drying speed and transfer rate between the second generation formula is contradictory, can only seek a balance, can not be a perfect solution. Three generations of formula because of its own advantages of smooth and fast drying, the other three generations of the ink formulation performance is better than the second generation formula, so the three generations of formula can be said to fundamentally solve the contradiction between the three, three generations of formula production Printing paper can be achieved both flat, fast drying speed, but also have a high transfer rate.
4. White point problem: the current second-generation formula generally use the old process of production, the other two generations of formula compound dissolved relatively difficult, prone to white spots. Three generations of formula from the coating process has been adjusted, the use of new technology, white point problem has been greatly improved.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197

Address: Central Road 323, Nanjing, Jiangsu, China

2017年6月26日星期一

Know More About Mimaki TS300P-1800 dye sublimationprinter

Mimaki TS300P wide format dye sublimation inkjet printer
The 77-inch wide, roll-to-roll Mimaki TS300P-1800 printer is a dedicated sublimation transfer paper model, offering new levels of quality and productivity for digital textile printing or applications requiring transfer to hard surfaces. This printer was specifically engineered for the dye sublimation industry. Designed to print onto the thinnest of transfer paper, it includes a high gap printhead that is unaffected by cockling that is a common occurrence when using thin media, while maintaining extremely high quality output. High print speeds of up to 1238 SqFt/Hr can be achieved in four-color mode. New Sb410 inks with enhanced resolvability improve print production yields.
Mimaki TS300P-1800 Series printer features: 
  • Dedicated transfer paper printer
  • Includes technologies for printing onto thin transfer media without cockling interference
  • 77-inch (1950 mm) width
  • Productivity of up to 1238 SqFt/hr (115 SqM/hr)
  • New Sb410 dye sublimation inks with improved stability
  • Two liter link bottles for all colors
  • Variable dot printing for exceptional image quality
  • MAPS4 for smooth images
  • Nozzle Check Unit and Nozzle Recovery System
  • Ethernet and email notification








Mimaki-developed and manufactured Sb410 sublimation inks offer enhanced resolvability, which improves the print production yield by ensuring more stable ink jetting. Moreover, because the ink stability is improved, daily cleaning is easier and fewer regular cleanings are required, further contributing to cost reduction and higher throughput. A two-liter bulk ink system is standard.
More info:
Company Name: Fei Yue Paper Industrial Co.,LTD
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

How to cut Acrylic well by laser cutting machine?

Some of the main influencing factors of a good laser cutting machine are listed below.
Type of Acrylic
Laser Parameters:Power, Frequency, Speed
Laser Process Setup: Table Setup, Lenses and Focus, Exhaust, Gas, Material Preparation
By managing these variables, we are able to ensure perfect, reliable and repeatable laser cuts of our acrylic material.
Acrylics are cut by vaporising the solid material. The laser is absorbed by the material causing it to change from a solid to a liquid then to a vapour. This is done with a very low level of chemical degradation. To help combat the copious amounts of vapour created by laser cutting, it is important to have a high quality, strong vacuum system to remove the vapour. The vapour that is emitted from the laser cutting process is highly flammable hence the laser system should never be left unattended while acrylics are being cut.

More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

2017年6月22日星期四

Why Epson Surecolor T7280 can replace F6280 to do sublimation printing?

Simply brilliant and brilliantly simple, Dye Sublimation Printing to Fabric has energeized the Visual Merchandising market. Dye Sub Printing to fabric has exploded with vibrant colors and emotion triggering appeal. 



Epson SureColor® T-Series, Developed using the latest advancements in performance imaging, like our exotic EPSON PrecisionCore™ TFP® print head, EPSON REALOID image processing hardware, and our breakthrough pigment ink technology, so actually this isn't sublimation inkjet printer, but nowadays, in order to save printing cost, more and more customers  choose this kind machine to do sublimation printing, especially for Self-employed persons. 
Epson T7280, 44" width, TFP print head, also same speed with Epson F6280 dye sublimation printer, so what differences between T7280 and F6280?
Epson T7280 Ink System:
Ink: 5-color Epson "live colorsXD "pigment ink system(Cyan, magenta, yellow, photo black, matte black)
Cartridge capacity: 700ml
Epson F6280 Ink System:
Ink: UltraChrome DS Ink: High Density Black, Cyan, Magenta, Yellow
Cartridge capacity: 1.5L 
If you want to use T7280 to do sublimation printing, you just need to replace pigment ink, use sublimation ink, then print on sublimation transfer paper. 

More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

Advantages of using roll to roll heat press calendar

Developed based on long-term customer experience and the advantages of popular models around the world, our multi-function rotary heat press machine is the most advanced and practical model in domestic market. This equipment also integrates the new technology of cotton cold transfer printing, further meeting the needs of output in the transfer printing industry.
Following are our features of our machine.
1) The electric control adopts latest technology that allows separation of the machine body and the blanket automatic, with a power failure protection functions.  
2)  It is applicable to all over or piece hot press, with a 2-3 times higher work efficiency.
3)  Electronic digital terminal temperature control and motor frequency conversion digital speed regulation, with high accuracy (±1-2°C).
4)  Drum surface with chrome plating, high hardness and good printing performance, wearable and stickiness-proof. 
5)  It adopts advanced oil-warming technology and liquid circular heat conduction, with even heating and high thermal conductivity. 
6)  External oil-filling tank and auto-close valve make it convenient to change heat transfer.
7)  A design of pneumatic pressure system make rotary  printing machine do perfect transfer.
8) Can let the blanket to be automatic correction, ensure the normal orbit, make the efficiency of heat transfer enhancement and the transfer quality guaranteed.
Following are our advantage of our heat transfer calendar:
1, Automatic Device for deviation and correction of Blanket---help you adjust the blanket automatically
2, Explosion-Proof Device---protect the machine work in a safe condition
3, Fabric Counter System---count the fabric it print
4, Peripheral Oil Tank outside---easy for you to add the oil
5, Rewind fabric and cooling system---help to rewind the finished fabric, and make the fabric cold...

6, Automatic pneumatic compression device---more convenient for the work of machine
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197

Address: Central Road 323, Nanjing, Jiangsu, China

2017年6月20日星期二

How to protect your Chinese sublimation inkjet printers?

Chinese sublimation inkjet printer is affordable, value for money, easy to operate, can print vivid colors, so more and more individual users and companies choose Chinese inkjet printer. However, during using domestic sublimation printer, many users only know use but ignore maintenance. In particular, individual users, not like the company has a special maintenance staff, ignoring the daily maintenance and maintenance of the machine, easily lead to frequent machine failures. Some tips about how to protect your Chinese inkjet printers as below:  
  • Check your humidity level. This tip is important and often brushed aside. Humidity can cause a lot of issues in your sublimation printing. It can affect both printer and paper. If it’s too dry, your printer has a hard time keeping its heads free and clear as the ink could dry and clog up nozzles. It only takes some cleanings to get them back but is still an unneeded headache. With too much humidity, your paper acts as a sponge. If you have too much humidity in your print space, you’ll notice when you arrive in the morning that the edges of your paper are curled up. This can be a big problem if you start to print. Your head can catch on the curl and damage itself, causing an expensive repair. If you do notice a curl, cut the paper yourself before engaging your printer. Too much humidity can also cause major gassing once pressed, possibly causing out gassing in your image and ruining it.
  • Clean under the print head. When performing maintenance on your larger machines, move the print head all the way over to the other side and clean the sides of it where ink can build up. This will keep it from dripping onto your transfer as the machine is printing. This is usually only an option on the larger machines. Do not wipe the head directly, just the plastic on the sides.
  • Watch your ink expiration dates. This is also a big deal in the printing process. Expired inks can have a major affect on your colors. The suspended dye will settle, and you’ll start to lose your vibrant color. If you do have expired inks, order new sublimation ink and flush the old ink out. Having the freshest ink possible will ensure your colors stay at what you need.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

2017年6月19日星期一

Epson 5113 Print head compared with DX-5 print head

What is Epson 5113 print head? What's the advantages of it?
1.More nozzles. 400*8 lines,3200 nozzles, much more than Epson DX5;
2.Wider.Epson 5113 is 1.3 inch, 30% more than Epson DX5;
3.Faster.For 2 head, max speed can reach to 80sqm/h;
4.Cheaper.Much cheaper than Epson DX5. 
Advantages:
1.More nozzles. 400*8 lines,3200 nozzles, much more than Epson DX5;
2.Wider.Epson 5113 is 1.3 inch, 30% more than Epson DX5;
3.Faster.For 2 head, max speed can reach to 80sqm/h;

4.Cheaper.Much cheaper than Epson DX5.

The Epson DX5 print head is used by various Chinese inkjet printers. It is a new generation print head that allows fast speed, high resolution printing with ecosolvent or mild solvent inks. The Epson DX5 original print head is delivered in a sealed Epson package. This printhead should not be used on Mutoh Valuejet or Mimaki JV33 / JV5 printers as it has different voltages and therefore offers a different image quality.
Suitable printers: 
1. Mimaki Series Printers: Mimaki Jv33 130/160/CJV-130/ Jv5130S/ 160S/ 260S/ 320S     
2. Mutoh series Printers: Valuejetjet 1204/1214/1304/1314  Valuejet 1604/ 1614/ 1618/ 2216 Valuejet 1624/1638

3. Chinese inkjet printers
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197

Address: Central Road 323, Nanjing, Jiangsu, China


2017年6月13日星期二

How to store sublimation transfer paper?

The inkjet sublimation transfer paper section is like a sandwich. The top layer is a functional coating that absorbs ink and separates the dyes, located in the middle of the base paper, which is resistant to warping. This three-tier structure of the rational division of the composition of the inkjet sublimation transfer paper, the indicators with the use of improved paper like the effect, otherwise there will be such an application problem exposed.
The humidity of the printing environment is best controlled at 45 ~ 70% RH, such as air is too dry easy to make the transfer paper warpage, this time when the amount of inkjet printing paper when the transfer of water and elongation of the arch may cause friction nozzle failure ; If the air is too wet will lead to drying speed and the two ends of the transfer paper elongation missing. Please install and enable air conditioning in the inkjet printing room, there is a stable environmental conditions can be stable inkjet printing. If there is no air conditioning constant temperature and humidity, the remedy is to remove the transfer paper before 1-2 days before printing plastic bags to transfer paper exposed to the air breathing, balance the transfer of paper moisture, the purpose of doing so is to turn The printing paper absorbs moisture and pre-elongates to avoid drying the transfer paper too much to absorb sublimation ink and elongate the arch.

When the ambient humidity is very large, the base paper layer of the transfer paper may be inconsistent due to uneven water on both sides, in which case the long strip pattern will be skewed or jammed, and the remedy It is possible to place a clean steel pipe between the paper feed side and the unwinding roll, and the appropriate weight on both ends of the pipe so that the transfer paper remains flat and the proper tension.
When the transfer paper absorbs too much water in the air, the paper becomes very soft, so that it is easy to wrinkle the transfer paper through the pickup roller. The remedy is to remove some of the pickup rollers, Reduce the force to keep the printer flat.
D) To confirm the printing surface of the transfer paper, the print surface of the full roll paper is outward, and when the printing surface can not be determined, the two faces of the transfer paper can be smeared with the fingers. Heavy is the print side.
E) When the transfer paper is placed on the printer, take a fine cloth glove to prevent the paper from being stained.
F) In the case of a new roll, it is safe to print a small piece of standard color (the standard color is the user familiar with the usual pattern consisting of CMYK four or six colors) and make a transfer test to ensure that every Roll the same color, such as the emergence of a significant color, to find the reasons and exclusion in a timely manner.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197

Address: Central Road 323, Nanjing, Jiangsu, China

2017年6月12日星期一

How to use Heat transfer vinyl film for t-shirt?

Heat transfer vinyl, It’s incredibly versatile, it comes in tons of colors, and you can find it in smooth, flocked, or glittery. Plus it sticks to cotton, polyester, and cotton/poly blends, so you can decorate pretty much any fabric items that you want!
Operating process:
A. First with a lettering machine to imitate the desired pattern or text
B. tear off the excess color film, forming a hollow effect, cut down the pattern facing the fabric;
C. with heat press machine or iron can be hot up.

D. The main features of the product 180 degrees Celsius hot up, hot finished than the traditional screen printing effect is good, not fade, not fall off. 

What about its features?
A. rich color types. 
B. feel good, soft not cracking, flexible, do not fade, does not fall off when machine wash or hand wash, no smell, fashion and environmental protection;
C. The use of equipment is simple, as long as there are computers, computer engraving machine and heat press machine can be used;

E. No plate making, eliminating the time and cost of plate making, and other desirable, saving manpower and material resources;
Applicable to all kinds of cotton, non-woven fabrics and other low-temperature pressure hot material textile fabrics, not subject to color restrictions, hiding power is extremely strong. The use of a very wide range: company uniforms, sports uniforms, numbers, customized t-shirts, etc.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197

Address: Central Road 323, Nanjing, Jiangsu, China

2017年6月9日星期五

How to solve sublimation paper when it gets curled?

Sublimation printing uses proprietary dyes which are transferred onto special coated transfer paper(we named it sublimation paper) via what is essentially a large ink jet printer. but if you choose poor quality sublimation paper,which is easy to get curled, so how can we solve it?
1.We adopt high quality sublimation base paper instead of the recycling paper. This type of base paper is made up of nature wood pulp (softwood and hardwood), which fiber is longer, and more flexible than the offset paper. So the better performance and the scalability can help to reduce the possibility of the curl. 
2.The anti-curl coating layer. The base paper has two sides, smooth side and rough side.   Typically, sublimation transfer paper is only printed on one side. Accordingly, the sublimation transfer paper only needs to have the sublimation ink receptive coating on the side that receives and holds the sublimation ink. So the smooth side will be coated with sublimation coating and the rough side can be uncoated. 

3.But if the paper is only coated on one side, the structure is not stable and balanced, the paper many have an increased tendency to curl. So the second method to preventing curling problem, is to coat the wire side with a functional coating too. The functional coating ,or named as anti-curl coating, could provide the sublimation transfer paper enhanced stability. 
With above two solutions, we solve the curling problem perfectly. Saving paper cost does not mean saving the total cost. Always a better quality help you  to improve your productivity and to protect your other equipment, that’s the real saving!
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

2017年6月7日星期三

Two Things we have to know about dye sublimation printing

In Digital printing technology has improved rapidly, and as a result, sublimation printers are now offering digital printing and sign shops are able to offer apparel. We saw this type of industry happen with the emergence of Eco-solvent printers, and we can see it now with dye-sublimation printers. If you’re considering adding this type of technology to your graphics business, here are two things you should know about dye-sublimation.

1. There Are Many Profitable Items That Can Be Used For Sublimation.
When people use the phrase “dye-sublimation”, snowboards, metal sheets, and floor mats are not the applications that naturally come to mind I suppose. However, dye-sublimation of both fabric and rigid materials is now possible due to wide-format printers. Dye-sublimation works by penetrating the surface of the substrate with ink. Man-made materials such as nylon, certain plastics, and polyester fabrics contain polymers, enabling the bonding of ink when heated.
Here are some items that could be used for sublimation:
Rigid Substrates – Aluminum, brass, glass, fiberglass, acrylic, plastic and hardboard sheet materials etc.
Rigid Products – Mouse pads, key chains, smart phone cases, pet bowls, light switch plates and more.
Fabrics – Choose from a range of 100% polyester fabrics. The choices of fabrics come in two distinct types:·One is woven texture for sturdy and hard wearing banner, exterior banners, exterior signage and upholstery; The other one is Knit material that drapes and flows more naturally, for custom apparel, indoor flags and banners, photographic backdrops and table covers.
Sports and Fashion Apparel – Everything from t-shirts and cycling jerseys to handbags and baseball caps is a possibility.
Photo Printing – From personalized gift items such as magnets, wall mounts and photo-apparel to photo backdrops.
Ceramic Tiles – Interior designers and decorators can create customized ceramic tiles for kitchens, bathrooms, foyers, museums, restaurants, and offices.

2. Machines are required for Sublimation.
Printing is only the first step of the process in dye-sublimation. For sublimation to take place, you need heat and pressure.
Successful dye-sublimation requires the following two-part process:
1.Print graphics onto special coated sublimation transfer paper using sublimation inks, so a quality printer is required.
2.Use a heat press to transfer sublimation printed paper to the item you want to decorate.
Actually, nowadays we may find roll-to-roll sublimation printer which can complete the printing procedures and the sublimation procedures together in one time.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

Why nowadays Light-weight sublimation paper is popular for user?

As we all know the competition the sublimation market is getting more fierce than before, so everyone wants to cut the cost in order to keep competitive on the market.
Also the emerge of more and more high speed printers like MS-JP4, D.gen, etc on the market. In order to live it up to the speed of high speed printer, the sublimation transfer paper must be lighter, so we can put more meters into one roll.
But Feiyue Inc. can guarantee your the quality of our lighter sublimation paper.
Dye sublimation is a water-based ink that works with a wide variety of inkjet printers. Most are adapted from standard Eco-sol models, though a few have been purpose-built.
This ink is very widely used for textiles because it is easy to work with and only requires heat and a little pressure as a post-process.
It produces bright colors, but the limitation is that it only works with polyesters. Polyester-natural fiber mixes can be used, but the less polyester the fewer the binding points for the dye, so the image is duller and wash resistance suffers.
The ink can be used either to print onto sublimation transfer paper or directly to the textile. Some manufacturers call it ‘disperse dye,’ usually when referring to direct printing. In some cases, the same ink is used for paper as direct to the textile (which needs a pre-treatment to reduce spread and wicking into the fibers before it is heat-fixed).
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

Why your sublimation paper get curled when printing?

When dealing with sublimation printing, some people may have encountered a big and serious problem---the sublimation paper curls and scratches the printer head. The worst result is that you take some money from your pocket and change a new printer head. At that time, you will have to find a way to reduce your cost to remain your profit. Today , we are going to offer you a solution to help you out of that problem ---paper curling ! 
First of all, why sublimation transfer paper get curl ? 
Sublimation paper is a coated paper, made up with two important parts : The base paper, and the sublimation coating, which all have contains moisture. When you put the sublimation paper in a environment of dry air and high temperature, the moisture will evaporate. At this time, if the moisture of the base paper and the coating evaporate inconsistently, the paper will curl. The process of the moisture evaporation, we call it “scalability”.  
Second, what’s the consequence of curling problem ?

As we stated above, When you are printing a heavy ink loading, the paper will scratch and damage the printer head once the paper curls. 
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197

Address: Central Road 323, Nanjing, Jiangsu, China

How to choose premium sublimation ink for your inkjet plotters?


In the choice of dye sublimation ink as much as possible to choose their own machines for the ink, different print heads or the same print head in the use of the process of shooting the frequency of vibration and printing voltage is not much different sub ink is not the same. A kind of ink can not meet all inkjet sublimation printers models, nor is all the sublimation ink are suitable for sublimation printing machine. 
So when the choice of ink as far as possible to choose light-resistant type, so you can use on the outdoor inkjet printing machine but also consider the stability of printer, the ink is organic paint organic solvent system in the uniform distribution of pigment particles size is not the same, some of the more poor quality ink machine because of her choice of raw materials on the excessive pursuit of cheap, inside the particle suspension system will be very unstable, with the temperature changes, the particles will be layered after the phenomenon of precipitation, Reaction in the picture machine on the print head will make ink out of the instability, this result will damage the nozzle. Photo machine ink use convenience, high-quality sublimation ink in the use of the process of painting no need to clean the nozzle, and frequent wipe. So that the efficiency and quality will be greatly improved, and can save more ink, if the poor medicine is more difficult to do. The last is the quality of raw materials, ink, high-quality raw materials is an important guarantee of ink, raw materials in the price is not the same, both the cost of sublimation printing ink and the quality of ink we all should pay attention to, using poor quality ink for printer will damage your print heads, and not environmentally friendly.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

2017年6月1日星期四

Why Epson DX-5 print head is more popular than DX-7?

In Among the many piezoelectric printers, the use of more is the Epson piezoelectric nozzle, Epson fifth generation nozzle (referred to as the first generation of five), but also the use of Epson seventh generation nozzle (referred to as seven generations of head) or 10 generation of the first piezoelectric printer and many more. However, in many domestic piezoelectric printer used in the most or to the number of five generations of head, because the Epson fifth generation nozzle in the piezoelectric printer application technology has been very mature, whether it is encrypted nozzle or non-encrypted nozzle, in the pressure Electric printer applications have been very popular with digital printing users of all ages. Why do five generations of nozzles by digital printing users favor it? Mainly because the Epson fifth generation nozzle does not pick the ink, controllable low cost, even with the general thermal transfer ink on the five generations of nozzle damage is not large, the use of stability, the printer on the Epson five generations of nozzle control technology is mature, print Output accuracy is also high, the speed is also fast, so the five generations of nozzle has become the first choice for many thermal transfer printer users.
Now there are many sublimation printer on the market to use Epson seventh generation nozzle and Epson third generation nozzle, but the technology is not too mature, so the stability will be better than the five generations of nozzles, while in the service life, seven generation nozzle is not as good as Five-generation nozzle, Epson seventh generation nozzle structure and design of ink droplets than the DX-5 printheads of fine twice, so seven generations of inkjet ink to be critical of the requirements of the ink than the five generations of nozzle ink is more smooth several times, then the drop Than the five generations of the nozzle is much smaller several times, although the speed accuracy than the five generations to be accurate, ink droplets ultra-fine, but the stability is far less than five generations of nozzles, because the user pay more attention to the stability of the printer, if the stability is not Well, the machine is prone to problems, in the use of practicality on the user's approval.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China