2017年4月28日星期五

How to use reactive sublimation ink for garments printing?


About usage of reactive sublimation ink on textile sublimation printing machine, when the inorganic salt concentration is added to the garment printing machine ink there will be more and the adsorption layer electrical phase negative charge enters the adsorption surface. When the charge of the adsorbent layer is completely neutralized, it is seen that the zeta potential in the micelles is reduced to zero, so that the electrostatic repulsion of the micelle becomes relatively small and may be completely absent, greatly reducing the anticoagulation of the The stability of the entire lax system has been destroyed, the formation of dye down.
At the same time, in the case where the inorganic salt concentration is too high, it is easy to corrode the nozzle, and the service life of the nozzle will be shortened. Now in the domestic market common active ink with green, black, magenta, blue, orange, yellow, gray and several other colors, the other colors will be diluted with green and 15 to 20% made of light green and light red The You can meet the basic needs of production, but there will be blocked in the use of the nozzle, hair color will be unstable, shade is not correct, the depth is not enough, color gamut and other issues. fabric sublimation printing machine is also likely to cause the nozzle blockage, the dye is also likely to cause nozzle blockage, the main factors of the machine is the ink when the interruption, ink mold fungus obstruction, ink tank barrier and other reasons. Dye factors are mainly dye accumulation, impurities, dye solubility is too large and so on. In the case of insoluble dyestuffs, the size of the dyestuffs is also critical, and the fine particles require no more than 10 particles in the range of 0.1 μm in the microscope, if your sublimation ink diameters of particles is out of this range, it can clog your print head, it's very important factor for you to choose sublimation ink
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

2017年4月27日星期四

What influence for 60gsm 80gsm 100gsm sublimation paper under different printing environment?

We did a comparison test of our 60gsm, 80gsm, 100gsm sublimation paper in order to let our customers know how the temperature and humidity affect the sublimation paper under different printing environment.

After printing, we put each type of sublimation paper for one sheet in our printing lab with with 68% humidity and 13℃. And one sheet for each type in our air condition room with temperature of 28 ℃ and 40% humidity.

And we find 60gsm,80gsm and 100gsm sublimation paper will not curl up in our lab with 13℃ and 68% humidity。

However, the result is different in our air condition room, The edge of 60gsm sublimation rolls up badly. And 80gsm and 100gsm sublimation paper did have little bit of curling trend, but it still can be put into printer for printing.
After all those stringent test and analysis, we suggest you to put your printer in a air condition room for printing, especially for sublimation paper with less 100 gsm. Best humidity for our sublimation paper is 40%-70% with temperature around 20 ℃, and for best storage of our paper, we suggest you to put them in the shady and cool place without being exposed to sunlight.

More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

2017年4月26日星期三

Why J-Teck Next series sublimation ink are very popular?

Italy top quality J-NEXT is a new generation water based dye-sublimation ink from J-Teck. J-NEXT's innovative formulation meets the requirements of today's hi-speed piezo-head printers from Epson, Mimaki, Mutoh, Roland and all OEM printers. 

J-Next Subly JXS-65 is the new generation water-based ink for digital sublimation application. it has been meticulously developed by J-teck R&D lab to offer high quality perforemances on any piezo digital printer but particularly on these equipped with DX5/6/7 print heads. this is possible thanks Cluster Technology. the exclusive sysystem stuided by J-teck to encapsulate the pigment molecules allowing for a smooth passage through the printing heads with no alteration. the innovation formulation of J-Next Subly guarantees fast drying on paper, excellent color release and image definition, optimal ink fluidity and printability. 

J-NEXT sublimation ink printing opens up a variety of material types to carry beautiful soft printed images. The process excels at printing for garments, table cloths, backdrops, banners, curtains and other usual textile materials.It’s not hard to think of how useful these synthetic surfaces can be as canvases for printed images. They make great promotional items such as t-shirts and dresses. Polyester media can be turned into a variety of stunning displays, such as:
A wall-mounted or upright pop-up banner, or banners meant to be used as sails, car covers and even tents.
Flags adorned with a company logo, country’s colors or even a design of your own
Household items such as window blinds, curtains, table cloths, chair covers, even light shades and napkins.
Special purpose clothing such as sports jerseys and event promotional t-shirts.
Coverings for tables, and table skirtsTension and pop-up fabric displays for promotional use at conference or special meetings.
Hanging fabric structures for big events such as trade shows where you want to stand out in a crowd.
Top tips:

We recommend that you should test before printing and set up the actual operating environment in order to achieve the desired transfer result. 
Shake the ink well before use, and follow the instructions on the label and product safety data sheet. 

In addition, the expression of ink varies with the nozzle, sublimation paper and the final use of polyester fabrics.  


More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

The breakthrough of sublimation digital printing

Dye-sublimation printing is completed using a large format inkjet printer with a special type of ink that consists of pigment and a solvent (water for instance). This ink is then used to print a reverse image of the intended design onto coated heat-resistant transfer paper. When the transfer paper is put into a heat press at 375 degrees Fahrenheit, the dye turns into a gas and permanently dyes the fabric or textile at hand with a high definition image or pattern.

Dye sublimation printing is a printing method that produces extremely high quality images that can be created on synthetic textiles such as polyester and nylon, opening up a whole new world of possibilities when it comes to putting images on objects such as banners, flags and even clothing. What’s more, the dye sublimation printing process can even place images on blended fibers, which involve different fiber types combined together.

Dye Sublimation Printing Process
It accomplishes this by using a technical printing technique that is quite different from traditional inkjet or laser printing. Instead, dye sublimation printing doesn’t make images by printing using individual dots – dots that when viewed up close can be easily distinguished by the spaces in between them.
A dye sublimation printer contains a roll of transparent film. To the human eye, this roll looks like sheets of multiple colors (red, blue, grey and blue) of cellophane that are all stuck together. Hidden within these film sheets are solid dyes. These dyes match the CMYK colors that make up the basic color building blocks in printing (cyan, magenta, yellow and black).
The way these dyes make it onto the target surface also requires a bit of description, as it’s quite different from the printing methods many are used to. As the print head makes its way across the film, it heats up. This heat makes the dyes contained in the film vaporize. The vapors then permeate the target surface (such as glossy paper or polyester). When they do this, they once again take on a solid form. The result, then, is a beautiful high-quality printed image that is simply unmatched when compared to inkjet or laser printing methods.
And when compared to those other printing techniques, dye sublimation solution has many benefits. Chief among these, as mentioned, is the superior image quality. Dye sublimated images are also more thoroughly printed into the target material, as opposed to being printed on top. This means they’re longer lasting and more resistance to being torn or otherwise worn out. Plus, the ability to place images on synthetic materials means there are a whole host of new ways to adorn objects with vibrant, colorful images. If you’re curious about the range of possibilities, just pick up the phone and give us a call for more details.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

Why Choosing Our three coating layers sublimation paper? and is it high quality?

Recently, we have marketed a new products: sublimation transfer paper with 3 layers of coating. For people who cares a lot about the sublimation printing quality, this is really a good choice. why we say that so confidently? later we will talk about why this kind of paper should have 3 layers of coating.
1. The first coating: pre-coating

As we all know, it is hard to guarantee the evenness of the base paper, sometimes you can see some impurities or holes on the paper. Because of that, the surface of the paper will not be smooth, and even hurt the print head when printing. The pre-coating is a process which can help us make the surface of paper become smooth.

2. The second coating: sublimation coating
This is the most important step, and also the essential step for making sublimation transfer paper. This layer are used to absorb the sublimation ink when inkjet printing.
3. The final coating: back-coating
Many paper manufactures will choose back-coating, because it can help the paper become more hard, and then become unti-curl. One of the headache problem for sublimation printers is the crimp of paper, this problem will not only affect the quality of printing, but also harmful for the print head. The back-coating can help you solve this problem effectively.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

2017年4月25日星期二

Dryfit Mesh polyester-based fabric for sublimation digital printing

Dryfit fabric (Mesh fabric) are mainly used for active wear. That means for situations where you’ll sweat like doing a sport activity or just having a walk under the hot weather. But what makes dryfit shirts popular is its ability to dry fast. Dryfit shirts, also known as rapid dry shirts are made out of hydrophobic (water-hating) fibers and hydrophilic (water loving) fibers. The dryfit shirts are made out of 100% polyester, resulting in a breathable wear. This allows the material to absorb moisture easily and dry up much faster, keeping the wearer more comfortable throughout their day. 

To personalise and print dryfit shirts, Printcious uses Sublimation printing on the white dryfit shirts. Sublimation printing is ideal for 100% polyester apparel. 
Digital Sublimation printing transfers an image onto syntactic material based fabric using dye-sub inks and a special transfer paper. With the right temperature, pressure and time, the ink is transferred onto the fabric permanently. Dye-sublimation is the most environmentally friendly, sustainable process possible in garment and textile printing. Compared to the multiple screens needed to screen print a design, sublimation can do millions of colors that are vibrant and the design will never crack, peel or fade.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

What advantages of dye sublimation printing?

Dye Sublimation Printing is a printing method that uses heat sensitive sublimation inks. Students love to use this method to print class tees especially if they have colorful designs and are using white dri-fit tees. During the dye sublimation process, these heat sensitive inks are first printed on a coated heat resistant transfer paper as a reverse image of the final design to be printed. Then the heat sensitive inks are subject to a certain specific level of heat and pressure until they turn into a gas and infuse right into a 100% polyester medium.

Dye sublimation process is a permanent infusion process. Hence, it allows the tees to be washed, ironed and even steamed without losing any clarity of the design printed.
Sublimation printing has many advantages over inkjet printing. Inkjet printing can only use four colors. By printing individual dots of the four colors, an inkjet printer can create the illusion of additional colors and tones. However, up close, you can see the different dots that make up the field. This looks, and is, unprofessional.
On the other hand, sublimation printing, by layering the different dyes, can create a solid field of color of any tone. This leads to a professional and attractive look.
Uses of dye sublimation printing
Sublimation is the industry standard for all professional printing. 
One of the big advantages of dye sublimation is that it doesn’t rely on the traditional printing technique of laying down colors as individual dots, which when viewed closely appear exactly as that – a grid of dots with white space between them – with the result that the image is less lifelike and realistic.
Instead, the unique way dye sublimation printing applies ink to the page gives the resulting image a big quality boost. That’s because as those vaporized ink colors permeate the target surface, they fade in through gradation at the edges of each pixel (which are the building blocks of a printed image). This gradation process means there isn’t a noticeable white gap between the pixels, giving the final image a much more robust and natural look.
Another way dye sublimation printing is better than other printing technologies is that it is longer lasting. Think of it this way. When printing something with an inkjet printer, for example, the image is literally painted onto the exterior of the target surface, one dot at a time.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

2017年4月20日星期四

How to use Sensient ElvaJet® Punch sublimation ink?

Sensient ElvaJet® Punch is the next level industrial digital sublimation ink to address the requirement for highest strength colors whilst maintaining the outstanding printing performance. 
ElvaJet® inks are suitable for any printer using a piezo printhead compatible with water-based inks. 
The outstanding color performance of ElvaJet® Punch EP on all printers equipped with Epson DX4, DX5 and DX6 printheads as well as those using Epson TFP printheads. ElvaJet® Punch is the high value ink you are looking for to print incredibly vibrant colors including block coverage with the highest quality and running performance, optimizing value and resources.
Features: 
Maximized color loading for ultimate gamut
Outstanding performance across all Epson printhead technologies
Optimal ink release from suitable transfer papers
Performance tuned for use with lightweight uncoated media
Extended decap time allowing ease of start-up
Eco-sustainability
Reduced consumption of ink, water and energy
ElvaJet® Punch EP inks should be used within the specified operating conditions:
1. Temperature: 18-25°C

2. Relative Humidity: >40%
If the inks dry in the nozzles, the normal cleaning procedure built into the printer should be applied. It is recommended to use our specific cleaning solution (e.g. Cleaning Solution 678CH0).
The inks can be printed either directly onto the textile or indirectly via an intermediate paper substrate.
When the direct printing method is used, the dyes must be fixed by steam or by drying at 210°C (410°F) for 30s. In order to reach optimum fastness levels the material should be washed after the fixation process.

With the indirect method, it has to be taken into account that the light fastness and rubbing fastness of the printed paper or other intermediate substrate are not very good. The printed substrate should therefore be handled with care and transferred as soon as possible after printing. To obtain a good color transfer and fixing, the printed substrate should be transferred at 210°C (410°F) for 30s.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

2017年4月19日星期三

Introduction about ORIC sublimation fabric printing machine

ORIC sublimation fabric printing machine introduction:
Directly Print on Fabric
Print And Heat Without Paper Transfer  
Perfect Enjoyment From High Speed    
With double Epson DX5 Print Heads of Staggered Layout
Characteristic: 
Independent Research of Intelligent Inkjet Technology
This machine use independent research and development of intelligent inkjet technology,Through intelligent control , it can make a variety of ink droplets of different sizes.It not only can show you the extreme resolution 1200dpi ,but also can accomplish the higher quality compared with the same type machines when it print in low resolution .
CISS Guarantee Printing Continuously
Stable continue ink supply system uses special algorithm to ensure the stability of ink supply when printing ,it solves the  problem of short of ink because of ink supply.  
Un-wind and Re-wind Media Perfectly
Use media fixed device to complete the winding and unwinding process of sublimation paperAdjust media axle at any time. Use of tension stick ensures the media enter into take-up axle completely.
All-steel manufacturing, every detail reflects our sincerity.
Cooperate with international brand like THK、IGUS, which lays a foundation for stability and durability.
Widely application: 
More info:
Company Name: Fei Yue Paper Industrial Co.,LTD
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

2017年4月17日星期一

Oil press calendar machine advantages

The scope and characteristics of Oil press calendar machine:
Application:  
This product is suitable for large banners, flags, non-woven fabrics, clothing fabrics, towels, sheets, mouse pad and other products of sublimation transfer, especially into a continuous fabric transfer. Can be continuous printing, fast, to meet the needs of large quantities of customers printing.
Roller drum heat transfer machine features: 
The machine for the pieces, cloth dual-use machines, both convenient and efficient transfer of various sizes of cutting products, but also can be transferred into a pair of cloth material.
(1) the use of oil heating method, heating evenly
(2) digital temperature and frequency controller, adjustable speed
(3) machine with three meters long single-length table, a conveyor belt to facilitate the delivery of finished products Taiwan
(4) the machine with a pressurized system, to meet the different requirements of different products on the pressure
(5) the use of imported heating pipe, heat uniform, durable, the use of imported blankets, blankets are not easy to deviation
(6) machine blankets for the off-style, blankets are not easy to burn, with three put two devices, to facilitate customers to retract products
Roller drum heat press machine's blanket is made using the United States DuPont raw materials produced in Shanghai, the drum is double explosion-proof drum, double layer than the single layer of safer, more reliable. Mechanical configuration, we also presented two gas up shaft (a received one), the mechanical weight of about 2500kg, effective door format can be customized according to customer needs! Our price is also because of quality, we have the confidence to do the best machine, so we are also guaranteed to the customer! Choose our machine is not wrong! Our product warranty for one year, life service customers.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

2017年4月14日星期五

How About FTB 90gsm Sublimation paper?

SKYIMAGE FTB 90gsm sublimation paper is special for light polyester and coated non-fabric items such as mug, ceramic tile, plate etc. Transfer your image by sublimation paper with sharp print quality, high transfer rate, fast dry, and vivid color.
The character of 90gsm normal sublimation transfer paper:
1, Best value, high color brilliance
2, Fast dry
3, Widely Using,  textile, polyester fabric, lanyard, mug, fashion garment and etc.
4. Up to 98% high heat transfer rate. 
1. What is the sublimation transfer printing:
Heat sublimation transfer printing is using sublimation ink, sublimation printer to print image. such as portrait, landscape, text etc by reversal way on the sublimation transfer paper, and then heated to a temperature of about 200 ℃ with heat transfer equipment, sublimation ink which is on paper will be in the form of gasification into substrates, so as to put the paper on the vivid images to transfer to textiles, porcelain, porcelain plate, metal material of a new technology.
2. Printers used:
Normal inkjet printers, sublimation inkjet printer.
Wide inkjet printers: Epson,Roland, Mutoh, Mimaki Chinese sublimation inkjet printers etc... 
3. Special sublimation ink:
Must use sublimation ink, this kind of ink made of disperse dye inks, it will produce sublimation and substrates with dyeing after high temperature, good quality ink is no plug nozzle, the sublimation ink color is vivid, good stability.
4. Adjust the appropriate concentration of color:
Adjust the concentration of the color in the computer, avoid the ink is too dry, need to check the effect of transfer after adjustment.
5. Adjust appropriate heat pressing temperature and time:
Condition: 180~220℃ transfer print with 20~30 seconds, different materials with different temperature and transfer print time, different materials with different transfer print pressure.
Heat transfer in the temperature range of about 165 ℃-220℃, time of about 10 to 30 seconds, you should try small sample printing before the formal mass transfer.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

2017年4月13日星期四

New Arrival---FU 100gsm dye sublimation paper with three coating layer

FU 100gsm is SKYIMAGE new generation sublimation paper, it has three coating layer, pre-coating layer---sublimated coating layer---back coating layer, which make this kind sublimation paper more stable and anti-curled. 
Sublimation transfer paper for aqua-based dye sublimation inks. It’s popular to gift and promotion items manufacturers using small desktop printer and large format printers. Fast drying and high transfer rate, easy handling, excellent stability and performance for excellent color reproduction on polyester T-shirts and polyester or polymer coated substrates, ceramic, metal, glass-coated.  
What's features of FU 100GSM sublimation paper?

1) Work on all inkjet printers, sublimation printer,indoor printer
2) Special ink : Use sublimation ink to print
3) Transfer the printed transfer paper  to fabric textile with good results
4) Bright color, washable 
5) Note: This paper must be printed by sublimation ink, Could not use on the 100% pure cotton textile,if you want to transfer polyester cotton fabric or t shirt garment, the cotton composition should be less then 30%.
6) Sublimation Paper specialized paper for sublimation ink, natural color, transfer rate highly to 99%.
Where does this sublimation paper sublimate on?
Advertising (Flags, Banners, Gaming Tables etc.)
Home Textiles (Curtains, Bed Linen, Decorative Fabrics etc.)

Hard Substrates Polyester-Coated and Polyamide (Ceramics, Metal Plates, Glass, Skis, and Snowboards)
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197

Address: Central Road 323, Nanjing, Jiangsu, China

2017年4月12日星期三

What features of KIIAN DIGISTAR ELITE sublimation ink?

We all know, Kiian digital ink is one of most famous ink in the digital printing world. and today we talk about its sublimation ink. for Kiian sublimation ink, there are many model types based on different print head. such as KIIAN Digistar HD-ONE, ELITE, E-GOLD, HI-PRO,K-ONE etc, these are most popular models for sublimation inkjet printing. today, we mainly introduce DIGISTAR ELITE ink. 
KIIAN DIGISTAR ELITE ink, digital sublimation ink for transfer printing. Ideal for transferring onto synthetic fabrics (polyester), onto rigid substrates (pre-treated) and onto blended fibres (min 80% PES). 
Features:
  • DIGITAL SUBLIMATION INK FOR TRANSFER PRINTING
Ideal for transferring onto synthetic fabrics (polyester)
Indicated for transferring on to blended fibres(min80%PES)
Ideal for transferring onto rigid substrates (pre-treated)
  • DIGITAL SUBLIMATION INK FOR DIRECT PRINTING
Indicated for direct printing onto synthetic fabrics (polyester)
  • COMPATIBLE WITH DX3, DX4 and DX5 PRINTHEADS
Compatible with the above-mentioned piezo printheads
What's more,  DIGISTAR ELITE ink is digital sublimation ink for transfer printing. Ideal for transferring onto synthetic fabrics (polyester), onto rigid substrates (pre-treated) and onto blended fibers (min 80% PES).
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

Why Ghosting occurs when printing and how to avoid it?

When  Sticky sublimation paper is a kind of sublimation paper, and the main difference between the normal sublimation paper is that it has a sticky coating layer. The sticky coating can adhere to the textiles very firmly, and it can help the paper and textiles not moving during the sublimation printing, then avoid "ghosting" problem. 
Ghosting is a double image in sublimation transfer. After the transfer process is completed, a light shadow in your T-shirt or other items transferred may occur, that is ghosting.
The adhesive sublimation paper is mainly applied to stretch materials like Lycra, polyester with spandex、polyester with cotton(<30%). There are many advantages of sticky sublimation paper, such as high transfer rate, good drying time, sharp text and fine lines as there is no movement between paper and fabric. But many people are puzzled one problem that why the sticky/tacky sublimation paper dries slower than regular sublimation transfer paper, even though the sticky paper is quick-dry type as well. This doesn’t mean the sticky paper has quality problem.
How does the ghosting comes ? There are mainly three ways :
1).You print something like a T-shirt from which the sublimation transfer paper overhangs a little. When you press, ink from the overhang portion transfers either to the upper or lower platen, depending on how you are pressing the item. Now you put a shirt or anything else under the press, and it comes in contact with the ink that transferred from the previous press, it will ghost onto the new item.
2). You place your dye sublimation paper on a preheated item. As soon as the sublimation transfer paper gets warm, it starts transferring. If you lay the sublimation paper down then move it , ghosting occurs .
3).The third reason that causes ghost is lifting the press up too fast. When we lift the press up, it creates some vacuum, and drop the image back down, causing the ink to transfer to another areas .
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China

2017年4月7日星期五

How to troubleshoot problems for sublimation printing

When you are working with any type of equipment, things can go wrong. That is why having technical support available when you purchase any equipment is so critically important. But even with top-notch technical support, you should be able to do some basic troubleshooting on your own. This will save you time in the long run, and also will make you more confident about how your equipment works.

The first thing in troubleshooting any problem is to try to systematically isolate that problem, so that you can determine what the cause is. Then with the problem identified, you can correct it. 
The heat press machine, sublimation paper, sublimation ink, inkjet printer, or even the environment can be the issue. Looking at the long list of possibilities, it could be easy to get frustrated, but it is not as bad as it appears. Taking things one step at a time and starting with the basics are the ways to solve the problem and save some sanity. Go through your list, isolate each one, and check them off your list as you go.
ENSURE YOUR PRINTER IS FUNCTIONING PROPERLY
The first thing to check is to make sure your printer prints a good nozzle check. By printing the nozzle check pattern, you are isolating your printer to make sure it is functioning properly. The printer will print a special test pattern, which can be compared to an example on your computer screen.
Gaps in the printed pattern will indicate a clog in the print head. This test is something you should get in the habit of doing before printing the first transfer each day. It is also not a bad idea to run one on your printer daily, if possible, even if you are not using your printer. It will help to keep your printer running in tip-top condition.
If you have run several cleaning cycles and your nozzle check does not improve, you should contact your distributor for advice on how to continue. There are many advanced techniques you can use to clear up a bad nozzle check if the head-cleaning process does not work. The correct technique to use depends on the sublimation printer setup that you are operating, and whether or not you have a bulk ink system.
CHECK YOUR HEAT PRESS AND MATERIALS
If printer issues do not seem to be the problem, some easy things to quickly check are the following:
Is your heat press running at the correct temperature? It is good to periodically check your heat press machine. 
Did you print on the correct side of the sublimation paper? It sounds silly, but it happens to all of us. If you print on the wrong side of the paper, your sublimated image will look light and splotchy.
Check the dates on your sublimation inkAre they old? Old inks can result in a color shift that can lighten the colors in your sublimated items.
It could be possible that there is an issue with the item you are trying to sublimate. First, you should make sure that the blank item you are trying to sublimate is suited for sublimation. All items that are sublimatable are made of, or coated with, a special polyester/polymer that will not melt at the temperature that sublimation occurs.
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China



1.8m ORIC sublimation printer with Dual DX 5 print heads


ORIC Large format inkjet printer applies to advertisement, digital textile printing, leather transfer, home decoration wallpaper and etc. With Double 5113 print head( DX-5 print head is available), it has the best control system in China and excellent structure and ultimate printing speed to get the best printing performance. We select materials strictly to supply our customers with best support and cost performance.
Advantages: 

  • Flat Form Heating System and Air Drying System Facilitate the Ink Droplets Size
The flat form heating system realizes the media heating on pre-print, printing and post-print, Meanwhile, infrared lamp is used to shape the ink droplet, fan solidifies ink on the media, which keep the double insurance.
Independent research and development of modularization negative pressure generating device
  • Take-up Device Provide Perfect Experience
Using material fixed device to complete the process of sublimation paper. It can finish the material axle adjustment , the use of tension stick ensures the material enter into take-up device completely.
  • CISS Guarantee Printing Continuously
Table continue ink supply system uses special algorithm to ensure the stability of ink supply when printing ,it solves the the problem of short of ink because of ink supply.
  • Humanized Printer Protection Design
All-steel manufacturing,every detail reflects our sincerity. Cooperate with international   brand like THK, IGUS,which lay a foundation for stability and durability.                       
More info:
Website:www.skyimagepaper.com
Company Name: Fei Yue Paper Industrial Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-83228884
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China