Tips for protect UV printer in winter

When the temperature gets colder every year, the number of failures of UV printers will also increase. It is mainly concentrated in four aspects: blockage and disconnection of nozzles, solidification and condensing of consumables, electrostatic interference, and unstable voltage. How to prevent these situations in advance.
First, the print head is blocked and disconnected.
After the temperature is reduced in winter, the nozzle will appear "clogged and disconnected", so don't worry too much. This is mostly because the UV ink's viscosity increases and the fluency decreases after the temperature of the UV ink decreases. Smooth result.
Solution: In addition to the conventional large ink cartridges and secondary ink cartridges, the heating or air conditioning can be turned on to keep the working environment temperature of the UV printer above 25 degrees.

Consumables solidify and condense
Some UV printer users found that the ink in the UV ink bottle became thick and some had condensed. When this happens, the ink has been discarded and cannot be used, mostly because the ink bottle is placed directly on the ground.
Solution: The storage of winter consumables needs to be placed on the shelf, not on the ground, or placed in the open air.
Third, electrostatic interference
In winter, the wetlands of the air are reduced, and after the dust is increased, static electricity often occurs. The direct effect is that the ejected ink droplets deviate from the direction due to static electricity, causing "flying ink" or "splatter ink" phenomenon, and the print quality will be seriously reduced. In serious cases, the circuit will be burned.
Solution: In addition to installing the necessary ground wire, the working environment of the UV printer needs to be maintained for 2 days/time to reduce dust. If the air is dry, just turn on the humidifier.
Fourth, the voltage is unstable
In winter, due to the heating demand, a large number of electrical appliances will be turned on, and current and voltage will be overloaded. These instabilities, which will affect the normal operation of the UV printer, in other words, it will directly burn the internal circuit.
Solution: In addition to choosing a regular manufacturer's UV printer (the circuit system has preventive and emergency resolution devices), it is necessary to install a voltage stabilizer, install a backup power source, and install independent lines for the device. Do not mix it with other electrical appliances.
More info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co., LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China